Take a minute to read some of our most frequently asked questions and answers.
Two blade electric sheers work the best, but the traditional 3 blade that produces the 1/4″ wide curled scrap will work as a second choice.
Most of our customers have given positive feedback about great success on decal adhesion without any extra product or prep. However, depending on the type of vinyl your graphics company uses some vinyl will adhere to non-metallic surfaces better than others. with that said we recommend a decal adhesion promoter such as 3M Primer 94 https://www.3m.com/3M/en_US/p/d/b40065491/.
No. Our material must be thermoformed to bend. Trying to bend in a sheet metal brake will fracture the composite fibers.
We offer black, white and white on black.
Currently we make left side panels for modifieds, we do not make them for late models.
Late model right side doors, quarters and filler panels and Contour conforming composite hoods.
Modified left and right side doors and quarter panels.
Yes, our products exceed the FMVSS 302 flammability test by 4x. This stands for Federal Motor Vehicle Safety Standard. Any material that is used in a passenger vehicle cabin in North America must meet this standard and our material passes with flying colors.
No, our composite is extremely stable and under extreme heat will not “oil can” like traditional plastics do.